Workplace Safety Centre Pty Ltd (ABN: 96 115 000 201)

Ph: 1300 4 SAFETY

Workplace Safety

Centre

170 Queen St

St Marys NSW 2760

Ph: 1300 472 338

02 9833 7500

info@worksafecentre.com.au

www.worksafecentre.com.au

Click here for Location Map & Directions

OH&S, Safety &

First Aid Training

Course in Manual Handling

(formally the WorkCover NSW Certificate Course in Manual Handling)

Employee and supervisor/manager training 

Course Background

Under the NSW OHS Regulation 2001, an employer must ensure that each worker receives training that covers the following:

       arrangements for managing OHS, including reporting hazards to management

       workplace health and safety procedures relevant to the worker, including the use and maintenance of risk control measures

       how workers can access health and safety information that the employer is required to make available.

Employers must ensure that any person who may be exposed to a risk to health and safety:

       is informed of the risk

       is provided with any information, instruction and training necessary to ensure the person’s health and safety.

The information, instruction and training (and the timing of that training) must also be commensurate with the risk to health and safety concerned. Training is essential if manual handling risks cannot be eliminated

The National Code of Practice: Manual Handling is guidance material published by the National Occupational Health and Safety Commission (NOHSC) which details two types of training, general manual handling training and particular or job specific training.

General training in Manual Handling

WorkCover NSW has developed this Manual Handling Training Course, which provides general training in the risk management of manual handling. It is delivered by suitably qualified and experienced trainers.

General training in manual handling is designed to:

       prevent manual handling injuries through risk identification, risk assessment and primary control through job and task design

       increase awareness and understanding of the complex nature of manual handling activities

       teach safe manual handling techniques.

This training should be provided to workers involved in manual handling, and also to the managers and supervisors of these workers, worker representatives, and staff responsible for work organisation, job and task design.

Course Duration: 3 - 4 hours   (general course plus any industry specific training )

Course Outline:

Topic 1               Introduction to Manual Handling

Topic 2               NSW Legislation and Codes of Practice

Topic 3               The Human Body and Manual Handling

Topic 4               Hazard Identification and Risk Assessment

Topic 5               Risk Control Measures

Topic 6               Communication and Manual Handling

                            Use of Mechanical and Other Aids 

Course cost

       Quote provided on request for group bookings

       Payment options are by Cheque, Cash, Eftpos, MC, Amex, Diners, Visa Card or by invoice to approved accounts.

Certification:

       Successful participants will receive a Certificate in OHS Manual Handling

       Training methods place an emphasis on group discussion, group exercises and the interaction of course participants.

Click here for a brochure

Click here to go back to WSC Courses Page 

This Website designed by Norwest Consulting Services.

Last modified: May 07, 2010

Copyright   2003 - 2009 Norwest Consulting Services, All rights reserved